BINDER CB-220 CO2 Incubator with O2 control

Features & Specifications

BINDER CB-220 CO2 INCUBATOR with OXYGEN control.
—> With the unique Hot Air Sterilization cycle at 180°C.

• Accurate sterilizable drift-free Infrared CO2 sensor, no need to calibrate after sterilization.
• CO2 introduction through patented gas mixing nozzle.
• CO2 range: 0-20%, ±0.1%.
• O2 Range: 0.2-95%.
• Setting accuracy for O2: 0.1%.
• O2 measurement with zirconium oxide (ZnO2) sensor.
• Humidity range: up to 95% rH.
• VENTAIR™ air jacket system allows for very short recovery times (after openning door for 30 sec):
– Temp. recovery: 5 min.
– CO2 recovery: 5 min.
• Large LCD graphic color display and controller for monitoring of parameters.
• Seamless Stainless Steel chamber with easy-to-clean integral shelf, eliminates fixtures system and all dead spots.
• Permadry™ humidification system, for condensate-free inner door, wall and shelves.
• Self-diagnostic system with visual and audible alarms.
• Ethernet interface for communication software APT-COM™.
• Zero-voltage relay contact for central monitoring.
• 3 shelves supplied (Up-to 8 can be used).
• External dim (WxDxH):740x715x1070mm.
• Chamber internal dim (WxDxH): 560x500x750mm.
• BINDER verification test certificate.
• Warranty: 18 months.
For 230V; 50Hz.
All details as per manufacturer catalog.

Downloads

CO incubators_Buyers-Guide.pdf
Hot-Air Sterilization at 180C.pdf
Binder CO2 incubator C170 & CB Model- catalog.pdf

http://www.binder-world.com/en/Products/CO2-incubators/Series-CB/CB-220